德國寶德帶引導式微波的液位測量計概述

上海乾拓貿易有限公司

電話：021-39526589-8004

手機：17321056802 (微信)

郵箱：[email protected]

企業QQ：2880626084

聯系人：楊江玲

地址：上海嘉定區嘉涌路99弄6號樓713室

 Cable gland M20 x 1.5 Measurement type Level of liquids1) Min. dielectric ? gure Rod and cable Coax.-? 21.3 mm εr > 1.6 εr > 1.4 

?  Universal level measurement device for liquids 

With a measuring range up to 75 m, the 8188 is best suited for tall vessels. 

Even process conditions such as strong steam generation, density ? uctuations

 or changes of the dielectric constant do not in? uence the accuracy of the measurement. 

型號 8188 是帶柔性探針、桿狀探針（兩者可更換）

General data Materials Housing / Cover Seal ring / Ground terminal Wetted parts Process ? tting Rod and cable

 Coax.-? 21.3 mm Process seal Inner conductor (up to the separation cable/rod) 

Spacers Rod-? 8 mm Cable-? 4 mm with gravity weight Coax.-? 21.3 mm (tube)

PBT, Stainless steel 316L (1.4404) / PC NBR / Stainless steel 316L

使用型號 8188 也可實現液體分離層測量，典型示例為油/水分離層。

它是一款適用于在液體中測量的通用液位測量計

液體分離層測量

* Stainless steel 316L* Stainless steel 316L* Display LCD in full dot matrix Process connection Thread G

 or NPT - ?", 1" Weight Housing Rod-? 8 mm Cable-? 4 mm Coax.-? 21.3 mm Gravity weight (only with cable version) 

890 g approx. 400 g/m approx. 60 g/m approx. 1110 g/m approx. 200 g Length Rod-? 8 mm Cable-? 4 mm Coax.-? 21.3 mm 

或同軸測量探針的液位測量儀，以持續測量液位。

它是為工業應用而設計的，用于在所有工藝技術區域中的液體中進行測量。

?  Liquid interface measurement ? Insensitive to dust and steam 

0.3...6 m - Lateral load: 10 Nm 0.5...75 m - Max. tensile load: 2.5 KN 0.3...6 m - Lateral load: 60 Nm Electrical connection

對粉塵和蒸氣不敏感

4...20 mA/Hart - 2 導體，ATEX/IECEx

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe,

 designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. 

8188 的測量區域較大為 75 m，因此也適用于高容器。

Stainless steel 316L* and PPS for version up to 6 bar Stainless steel 316L

* and PEEK for version up to 40 bar Stainless steel 316L* and PEEK FKM

? 4...20 mA/HART - 2 wires, ATEX/IECEx certi? cation 

甚至流程條件，例如形成的蒸氣、密度起伏或介電常數變更等，也不會影響測量精度。

在探針或容器壁上吸附或形成的冷凝液不會對測量結果造成影響。

Stainless steel 316L* PFA (only for coax. probe version) Stainless steel 316L

Build-up or condensation on the probe or vessel wall do not in? uence the measuring result. 

A liquid interface measurement is also possible with the Type 8188, typically an oil/ water interface.

德國寶德帶引導式微波的液位測量計概述