YS銷售日本SMC真空壓力表，MDBT63-500 

上海乾拓貿易有限公司

電話：021-39526589-8004

手機：17321056802 (微信)

郵箱：[email protected]

企業(yè)QQ：2880626084

聯系人：楊江玲

地址：上海嘉定區(qū)嘉涌路99弄6號樓713室

 Use a pipe tape for sealing. Recommended tightening torque: R     : Set between 7 and 9 N·m, R : 12 and 14 N·m respectively. 

Type Back side thread

Air ±3%

Caution 1. During transport and installation, do not apply shock to the product, such as by dropping doing so will affect its precision. 

2. Regarding the installation posture, place it perpendicular to the ground, with the zero point on the reading of a pressure gauge facing down. 

3. Do not install it in an area that is exposed to high temperature or humidity, because doing so will lead to improper operation.

 4. To screw in the pressure gauge, make sure to turn the gauge by placing a wrench over the square wrench flats.

Note 1) Do not apply more excessive pressure than max. pressure display. It will be a cause of malfunction. 

Indication unit kPa kPa kPa kPa kPa

Connection thread Note

GZ46-K-01 to 02 GZ46-K-01 to 02-C, C1 GZ46-K-01 to 02M GZ46E-K-01 to 02M GZ46-K2K-01 to 02

Note 1) Do not apply more excessive pressure than max. pressure display. It will be a cause of malfunction. 

. Make sure that no direct impact or vibrations are applied to the body. 

Pressure range (1) kPa

— With cover ring assembly — — —

R     ,      M5 (Female thread) 1 8 1 4 R     ,      M5 (Female thread)

Model (Made to Order) Model Indication unit kPa — R     , Connection thread Note GZ46-K1K-01 to 02 –100 to 100 Pressure range (1) kPa 1 8 1 4

Note 1) When mounting a pressure gauge, use caution not to tighten excessively. Excessive tightening will cause product failure.

–100 to 0 –100 to 0 –100 to 0 –100 to 0 –100 to 200

Rolled steel (Black melamine painted)

Wetted parts degrease washing

Polycarbonate (Hard coated) Part no.: G46-00-00-2

Polycarbonate Part no.: G46-00-00-3 Brass (Electroless nickel plated) (3)Brass

Fluid contact part cleaning Case (Surface treatment) Clear cover (Surface treatment) Stud (Surface treatment) Bourdon tube

Part no.: 1305104-1A Part no.: 1305104-3A

Attachment: With cover ring assembly

 R ,  R (Option: M = M5 x with thread) 1 8 1 4

Note 2) When using other fluids, please consult with SMC for fluid compatibility information concerning corrosive potential. 

Note 3) Movable parts (gear and etc.) in the pressure gauge are made of brass. Note 4) X3 (wetted parts stainless steel) specifications are not available. 

2. If operating under pressure pulsations or in high frequency operations, please contact SMC.

YS銷售日本SMC真空壓力表，MDBT63-500